How to

Manufacturer’s Portal

For access to the EverLoc^® Manufacturer’s Portal please contact manufacturer@everlocretainingwalls.com

Corner (L/R)

EverLoc® Corners have an integral locking mechanism assuring ninety degree alignment and proper setback. Corners are equipped with radius edges giving them a finished appearance. These features are especially helpful when building steps! An 833 utility piece is used beside each corner to maintain proper bond.

Dimensions:	8″ H x 9″ D x 12″ L
Setback:	0 degrees
Block/Cube:	45
Face Area:	1.2 ft²

HHCorner (L/R)

EverLoc® Corners have an integral locking mechanism assuring ninety degree alignment and proper setback. Corners are equipped with radius edges giving them a finished appearance. These features are especially helpful when building steps! A utility piece is used beside each corner to maintain proper bond.

Dimensions:	4” H x 9” D x 12” L
Setback:	0 degrees
Block/Cube:	90
Face Area:	0.6 ft²

450 Full Express

The 450 Full Fence is a 9” deep, half-high unit with the same front face and locking features as the 450 Full wall unit. It is used in both the 450 Full and 450 Traditional/Full Express systems.

Dimensions:	4” H x 9” D x 18” L
Setback:	3/8″
Block/Cube:	80
Face Area:	0.5 ft²

810 Full Express

The 810 Full Fence is a 9” deep, one square foot unit with the same front face & locking features as the 810 Full wall unit. It is used in the 810 Full and 810 Traditional/Full Express systems.

Dimensions:	8” H x 9” D x 18” L
Setback:	³/₄“
Block/Cube:	40
Face Area:	1.0 ft²

450 Full

Dimensions:	4″ H x 12″ D x 18″ L
Setback:	3/8″
Block/Cube:	64
Face Area:	0.5 ft²

810 Full

Dimensions:	8″ H x 12″ D x 18″ L
Setback:	3/4″
Block/Cube:	34
Face Area:	1.0 ft²

450 Traditional Express

The 450 Traditional Fence is a 9” deep, half-high unit with the same front face and locking features as the 450 Traditional wall unit. It is used in both the 450 Traditional and 450 Traditional/Full Express systems.

Dimensions:	4” H x 9” D x 18” L
Setback:	3/8″
Block/Cube:	80
Face Area:	0.5 ft²

WeatherDome™ Column Cap

The Column Cap is a nice addition to the Express system giving columns that finished look. Three pieces are required to cap a standard EverLoc® Column. Having the same basic features as the fence cap, with its arched top and smooth faces, the Column Cap adds the finishing touch!

Dimensions:	4 5/8″ H x 23″ D x 7 1/2″ L
Setback:	N/A
Block/Cube:	32
Face Area:	0.16 ft² x 2

WeatherDome™ Fence Cap

The Fence Cap is the most recognizable of the Express components. The cap provides a majestic, bold look for the Express with its arched top and smooth sides. The cap, also, provides another function by connecting the front and back sections of the Express.

Dimensions:	3 3/8″ H x 16 1/3″ D x 9″ L
Setback:	N/A
Block/Cube:	48
Face Area:	0.19 ft² x 2

810 Traditional Express

The 810 Traditional Fence is a 9” deep, one square foot unit with the same front face & locking features as the popular 810 Traditional wall unit. It is used in the 810 Traditional and 810 Traditional/Full Express systems.

Dimensions:	8” H x 9” D x 18” L
Setback:	3/4″
Block/Cube:	40
Face Area:	1.0 ft²

425 Half

The 425 Half is a key component in the Aztec™ system. It is, also, great when used by itself for small retaining walls such as garden walls. As an accessory, it can be used as a half block or to advance bond in a radius for any of the 450 styles.

Dimensions:	4” H x 12” D x 9” L
Setback:	3/8″
Block/Cube:	128
Face Area:	0.25 ft²

HHCorner (L/R) w/417 Utility

EverLoc® Corners have an integral locking mechanism assuring ninety degree alignment and proper setback. Corners are equipped with radius edges giving them a finished appearance. These features are especially helpful when building steps! A 417 utility piece is used beside each corner to maintain proper bond.

Dimensions:	4” H x 9” D x 12” L
Setback:	3/8″
Block/Cube:	90
Face Area:	0.6 ft²

450 Traditional

Dimensions:	4” H x 12” D x 18” W
Setback:	3/8″
Block/Cube:	64
Face Area:	0.5 ft²

Weather™ Wall Cap

Dimensions:	3 ³/₄” H x 12” D x 9” L
Setback:	3/4″ or Flush
Block/Cube:	80
Face Area:	0.19 ft² x 2

850 Half

The 850 Half is a .5 square foot unit. It can be used by itself for constructing retaining walls or as an accessory for other EverLoc® styles. The 850 Half is perfect when starting a walls against vertical structures to maintain bond. It can, also, be used in an 810 Traditional or 810 Traditional/Full wall for bond advancement through radii.

Dimensions:	8″ H x 12″ D x 9″ L
Setback:	3/4″
Block/Cube:	45
Face Area:	0.5 ft²

833 Utility

The 833 Utility serves two purposes. First, it is used beside each corner to establish running bond. Secondly, it can be inserted in a radius to advance bond.

Dimensions:	8″ H x 12″ D x 6″ L
Setback:	3/4″
Block/Cube:	60
Face Area:	0.33 ft²

Cap

Caps are used to cap retaining walls and for stair treads. A groove in the bottom of the cap locks it onto the lugs of the SRW unit beneath it. The split surface of the cap aligns vertically with the split surface of the SRW unit it is resting on. A beveled top edge gives the cap a finishing touch, and provides a smooth transition at the front edge of stair treads.

Dimensions:	4″ H x 12″ D x 18″ L
Setback:	3/4″
Block/Cube:	32
Face Area:	0.5 ft²

Corner (L/R) with 833 Utilities

Dimensions:	8″ H x 9″ D x 12″ L
Setback:	3/4″
Block/Cube:	45
Face Area:	1.2 ft²

810 Traditional

Dimensions:	8″ H x 12″ D x 18″ L
Setback:	3/4″
Block/Cube:	34
Face Area:	1.0 ft²

Design and Installation

Refer to the National Concrete Masonry Association’s TEK Manual below for important information regarding Segmental Retaining Walls.

CAD drawings shown here are for typical installations only! Check your local building codes and requirements for Segmental Retaining Walls. Soil types and site conditions greatly affect retaining wall design. Consult an engineer for more specific details. Refer to engineered drawings for walls requiring geotextile. Customers are responsible for final installation.